For Canvas or fabric mounting first, position the item onto the board. Then place the board into a drymount press at 125°F for 15 to 20 seconds. This will
turn the adhesive into a Jell that will migrate into the material. When the item is cooled, it can be removed. Fabric will be more difficult to remove.

Repositionable Self-Adhesive

The newest pressure-sensitive board in the Industry Available in both repositionable and permanent Adhesives.

Note: Repositioning is only possible prior to the print being pressed into the final position. Care should be taken while repositioning the print to ensure that all the air is pressed out that maybe between the board and the print.

This popular board features a repositionable adhesive. It can be repositioned prior to the print being pressed into the final position. Once the print is in place, it can be pressed onto the board using a nonabrasive squeegee. Start from the center of the board and work to the edges, squeezing out the air pockets if any. The adhesive will start to become permanent once the print is in place. 

Available in 3/16” thickness only in both Black on Black and

Sizes available.

White: 3/16” 32” x 40” 40”x60” 48”x96”

Black on Black: 
3/16” 32”x 40” 40”x 60” 48”X96”

Gator Board is one of the strongest, dent-resistant, and warp-resistant boards available. It is ideal for projects that call for a rigid, warp-resistant, and acid-free application.
Gator Board is a registered trademark of the 3A Composites USA.

Sizes available.

White: 3/16″ 48″x96″

Black on Black: 3/16″ 48″X96″

The most popular drymount board that features acid-free adhesive. The only Drymount board that is removable, repositionable, and reusable. Activates at 150°F to 160°F in 15 to 20 seconds. The foam board is available in Black on Black and White.

Sizes available:

White: 3/16″ 24″ x 36″ 32″ x 40″ 40″x60″ 48″x96″ 1/8″ 32″x 40″ 40″x 60″

Black on Black: 3/16″ 32″x 40″ 40″x 60″ 48″X96″

Competition Plate (3mm) Is an aluminum composite with a .015 aluminum sheet on both sides. It is completely acid-free, very rigid, resistant to denting, and has an ultra-smooth surface. Ideal for drymounting any project where smoothness and rigidity are important. Because of the type of product activation temperature is 160°F to 165°F for 1 to 2 minutes. Important: When removing the dry mounted pieces use gloves. The piece will be 160°F. Let cool before handling.

 

Competition Plate can be cut in various ways. Using a Fletcher Terry wall cutter #3100. Use the acrylic cutter setting. Also, a hand-held acrylic cutter will work well. All that is needed is to cut through the aluminum surface sheet on one side of the board and snap and flex the board until the other aluminum side snaps.

 

For more information, contact the customer service department at

(888) 610-5663

 

Sizes available:

 32″ X 48

48″ X 96

.048 (4 ply)

This board is ideal for mounting photographs. It is super smooth, and more rigid that regular mounting board, while still maintaining the same thickness as regular mounting board.

Available in Black and White. In 4 ply and 8 ply thicknesses.

Sizes available.

White (.048) Photo Board 32” x 40”
White (.048) Photo board 40” x 60”
Black (.048) Photo Board 32”x40”

.098 (8 ply)

This board is ideal for mounting photographs. It is super smooth, and more rigid that regular mounting board, while still maintaining the same thickness as regular mounting board.

Available in Black and White. In 4 ply and 8 ply thicknesses.

Sizes available.

White (.098) Photo Board 32” x 40”
Black (.098) Photo Board 32”x40

This popular drymount baord features acid free adhesive an ultra smooth surface and is thinner then regular foamboard. It is removable repositionable and reusable. Activates at 150° to 160° in 15 to 20 seconds. It is ideas for mounting photos and very thin paper prints. Available in regular white and acid-free white. It is ideal for use where a thing rabbet is needed. Up to 3 mattes can be used with a 3/8″ rabbet.

Sizes avaialble.

White (.048) Regular 32″ x 40″
White (.500) Acid free 32″ x 40″ 

Permanent Adhesive

For Canvas or fabric mounting: first position the item onto the board. Then place the board into a drymount press at 125°F for 15 to 20 seconds. This will
turn the adhesive into a Jell that will migrate into the material. When the item is cooled, it can be removed. Fabric will be more difficult to remove.

The most popular drymount board that features acid-free adhesive. The only Drymount board that is removable, repositionable, and reusable. Activates at 150°F to 160°F in 15 to 20 seconds. The foam board is available in Black on Black and White.

Sizes available:

White: 3/16″ 24″ x 36″ 32″ x 40″ 40″x60″ 48″x96″ 1/8″ 32″x 40″ 40″x 60″

Black on Black: 3/16″ 32″x 40″ 40″x 60″ 48″X96″

Gator Board is one of the strongest, dent-resistant, and warp-resistant boards available. It is ideal for projects that call for a rigid, warp-resistant, and acid-free application.
Gator Board is a registered trademark of the 3A Composites USA.

Sizes available.

White: 3/16″ 48″x96″

Black on Black: 3/16″ 48″X96″

Competition Plate (3mm) Is an aluminum composite with a .015 aluminum sheet on both sides. It is completely acid-free, very rigid, resistant to denting, and has an ultra-smooth surface. Ideal for drymounting any project where smoothness and rigidity are important. Because of the type of product activation temperature is 160°F to 165°F for 1 to 2 minutes. Important: When removing the dry mounted pieces use gloves. The piece will be 160°F. Let cool before handling.

 

Competition Plate can be cut in various ways. Using a Fletcher Terry wall cutter #3100. Use the acrylic cutter setting. Also, a hand-held acrylic cutter will work well. All that is needed is to cut through the aluminum surface sheet on one side of the board and snap and flex the board until the other aluminum side snaps.

 

For more information, contact the customer service department at

(888) 610-5663

 

Sizes available:

 32″ X 48

48″ X 96

This popular board features a repositionable adhesive. It can be repositioned prior to the print being pressed into the final position. Once the print is in place, it can be pressed onto the board using a nonabrasive squeegee. Start from the center of the board and work to the edges, squeezing out the air pockets if any. The adhesive will start to become permanent once the print is in place. 

Available in 3/16” thickness only in both Black on Black and

Sizes available.

White: 3/16” 32” x 40” 40”x60” 48”x96”

Black on Black: 
3/16” 32”x 40” 40”x 60” 48”X96”